5. Port Moresby (AYPY)

Positions

An additional Non-Standard position for AYPY ACD will be used

Name	ID	Callsign	Frequency	Login ID
Port Moresby Delivery	AYPY ACD	Jacksons Delivery	124.400	AYPY_DEL

Workload Management

Due to the extreme workload expected for all positions, the use of the OzStrips plugin for managing aerodrome positions is mandatory. Controllers should familiarise themselves with the plugin and the VATPAC recommended workflow.

Airways Clearance Delivery (ACD)

Flight Plan Compliance

Ensure all flight plans are checked for compliance with the approved WF Route:

DCT PY DCT NUPTA DCT APISO B462 MK V153 MUNAR Y61 RUROX Y177 BN DCT

OzStrips will flag any non-compliant WF route.

If an aircraft has filed an incorrect route and you need to give an amended clearance, this amendment must be specified by individual private message, prior to the PDC.

Phraseology

AYPY ACD: "AMENDED ROUTE CLEARANCE. CLEARED TO YBBN VIA NUPTA DCT APISO B462 MK V153 MUNAR Y61 RUROX Y177 BN DCT. READBACK AMENDED ROUTE IN FULL DURING PDC READBACK. STANDBY FOR PDC."

WorldFlight Teams

WorldFlight Teams shall have STS/STATE added to their remarks, and WF TEAM added to their Global Ops Field, to ensure they receive priority.

Tip

The vatSys Events Plugin will also highlight WF Teams, as shown below. Click on the link to install it, or alternatively, use the Plugin Manager

Strip Setup

By default, vatSys strips will be set to show in Alphabetical Order.
This must be changed to be ordered by Time, as shown below.

SID Selection

All aircraft shall be issued the NUPTA1 SID.

PDCs

PDCs will be in use by default, to avoid frequency congestion. ACD shall send a PDC to each aircraft as they connect, prioritising those who connected first. Upon successful readback of the PDC, ACD shall direct the pilot to contact SMC when ready for pushback or taxi.

Tip

OzStrips displays strips in the Preactive bay ordered by connection time. Aircraft who connected first are shown down the bottom of the bay.

Work through the OzStrips Preactive bay from bottom to top when sending PDCs.

Surface Movement Control (SMC)

Runway 14R/32L

Runway 14R/32L will be used for taxiing. The Runway is released to SMC by default.

Southern Grass Taxiway shall be used for Runway 32R departures queuing. It may also be used for Runway 14L Arrivals vacating.

Standard taxi directions are shown below.

Pushback Delays

SMC will be responsible for delaying aircraft's pushback requests, in order to avoid overloading the taxiways.

If there are more than 5 aircraft in the queue at the Holding Point for the departure runway, do not approve any more pushback requests.

OzStrips

All aerodrome controllers must be familiar with the VATPAC recommended workflow for OzStrips.

Ensure the Queue function is used to actively to keep track of the order of requests.

A Custom PDC SENT bar should be created in the Preactive window, to keep track of who has and hasn't received a PDC.

A388 Parking

AYPY does not have any gates suitable for A388 parking. A388s must be instructed to park off-apron on the grass, to ensure they do not block any parking spots or taxiways.

Tower Control (ADC)

Runway 14R/32L Release

Runway 14R/32L will be used for taxiing. The Runway is released to SMC by default.

Departure Spacing

Ensure that a minimum of 90 second spacing is applied between subsequent departures from the same runway.

Wake Turbulence Separation

Due to the tight sequence, there are times that Wake Turbulence Separation cannot practically be applied.

When a following aircraft is of a lighter Wake Turbulence Category than the preceding aircraft, a traffic statement and wake turbulence caution shall be issued.

Phraseology

AYPY ADC: "ANG3, 747 has just departed. Caution Wake Turbulence. Runway 32L, Cleared for Takeoff"
ANG3: "Cleared for Takeoff Runway 32L, ANG3"

Runway Vacating Instructions

To minimise runway occupancy, it is essential that aircraft vacate the runway without delay. ADC shall instruct all arriving aircraft to vacate via the following exits when issued a landing clearance:

Landing Runway	Exit
14L	M
32R	F

If aircraft miss these exits, they should be instructed to vacate via A (landing 32R) or via the grass (landing 14L) without delay.

ATIS

The ATIS OPR INFO shall include:
EXP CLR VIA PDC

Coordination

Auto Release

Available for aircraft assigned:

A Runway nominated on the ATIS; and
The NUPTA1 SID; and
A080